Pandora: Documentation en: Energy Efficiency
- 1 Energy Efficiency with Pandora FMS
1 Energy Efficiency with Pandora FMS
Sustainability and energy efficiency are saving. Different manufacturers, both software and hardware. They propose different methods, strategies and tools. Pandora FMS can integrate all of them in a single tool.
1.1 IPMI plugin for Pandora FMS
IPMI (Intelligent Platform Management Interface) is an interface created by Intel in order to administrate and monitor IT systems. Through IPMI, for example, check the temperature sensors, voltages and ventilator velocity, all of them in a remote way.
1.1.1 Working of the IPMI plugin
Monitoring through IPMI is based on two components:A plugin that collects data from the device and a Recon Task that discover in an authomatic way all the devices of one network that supports IPMI.
1.1.2 Installing the Plugin and the Recon task
Both the plugin and the recon task needs the tool FreeIPMI from its version 0.7.16
In Debian distributions, it's possible to use the command:
#apt-get install freeipmi-tools
126.96.36.199 Register of the IPMI plugin
The first step is to register the plugin. If you have any doubt, you can check the section Monitoring with plugins.
The parameters of the plugin registration are the following ones:
The values that you should enter in the different fields are these:
- Name: IPMI Plugin
- Plug-in Command: /home/admin/ipmi-plugin.pl (Path where is the ipmi-plugin.pl file )
- Plug-in type: Standard
- Max. timeout: 300
- IP address option: -h
- Port option: <vacio>
- User option: -u
- Password option: -p
- Description: This plugin gets information from IPMI devices.
It's very important to use "IPMI Plugin" for plugin name because the correct behavior of recon task depends on it
188.8.131.52 Registration of the Recon Script
The second step to finish the installation is to register the Recon Script. You can see the complete process of registration at section Recon Server. The registered plugin will be like this
- Name: IPMI Discovery
- Script fullpath: /home/admin/ipmi-recon.pl (Path where is the ipmi-recon.pl file)
1.1.3 Monitoring with the IPMI plugin
To start the monitoring we need to create a Recon Task that discovers all the IPMI devices. This task will create one agent by each device discovered, and the modules with all the available checks for each device.
The following screenshot shows an example to explore the network 192.168.70.0/24 in it all the IPMI devicew have as credentials admin/admin,
With this configuration, the Recon Task will do a network discovery and will create one agent by each device found with all the available modules.
In the following image you can see the end result, some of the modules created in one agent of the explored network.
1.1.4 OEM Values Monitoring
The values returned by the IPMI commands depends on each manufacturer. Because of this, it is possible that by default the Recon Task doesn't find the module that it needs to monitor.
Besides the modules by default, each manufacturer can enable a serial of OEM commands from their own baseboards.You can check the supported devices and the available commands for each one at:http://www.gnu.org/s/freeipmi/manpages/man8/ipmi-oem.8.html
With these commands you can create one module type plugin that executes the necessary command. You can see how to do this in the section Monitoring with Plugins.